PVC Additives Selection Guide - from Shandong Polymer additives
This guide helps you find the right PVC additives for your application. Simply identify your primary need or challenge in the PVC processing chain.
Step 1: Find your Your Primary Need or Challenge, then reach the recommended our Product Category.
Item | Primary Need or Challenge | Recommended our Product |
1 | Increasing Production Speed & Melt Strength to improve the surface quality | PVC Processing Aids |
2 | Enhancing Impact Strength & Toughness | Impact Modifiers |
3 | Preventing Heat Degradation | Heat Stabilizers |
4 | Improving Processability & Flow, reducing friction and energy consumption. | Lubricants |
5 | Modifying Hardness & Flexibility to make PVC soft and flexible. | Plasticizers |
Step 2 Confirm the exact range of products
Catalogue | Series | Type | Application | |||
PVC Processing aid | General Processing Aid | P-125 | Equivalent for K-125 | |||
P-120N | Equivalent for K-120N | |||||
Lubricating Processing Aid | P-175 | Equivalent for K-175 | ||||
Transparent Processing Aid | P-20 | Equivalent for PA-20 | ||||
SAN Processing Aid | P-801 | Equivalent for ACR-401 | ||||
Foaming regulator （High viscosity PA） | P-530 | Viscosity: 11-13 Foaming product (thickness ≤5mm) | ||||
P-600 | Viscosity: 12-13 Foaming product (thickness 5-15mm) | |||||
P-700 | Viscosity: 13-14 Foaming product (thickness＞15mm) | |||||
PVC Impact Modifier | Chlorinated polyethylene | CPE-135A | Rigid PVC application | |||
CPE-135B | Soften PVC application | |||||
AIM Impact modifier | AIM-50 | Equivalent for FM 50, DMA650 | ||||
PVC Stabilizer | Ca-Zn Stabilizer | CS-50 | Profile and pipe fitting application |
CS-60 | PVC Foaming sheet and WPC application | ||
CS-70 | PVC pipe application | ||
Lead Stabilizer | LS-18 | PVC pipe application | |
LS-24 | PVC Panel application | ||
LS-32 | PVC Profile application | ||
Lubricant | Internal Lubricant | G60 | Rigid PVC application |
External Lubricant | G74 | ||
PE wax | PW-105 | ||
Others | Plastizer | DOP | Other additives |
Step 3 Consult US
Use this guide as a starting point and contact Alice by service@pvcadd.com for detailed technical data and tailored recommendations based on your specific formulation and equipment.
