PRODUCT
- Contact Person: Mr Clinton
- PHONE:13465705350
- ADD:WENZHOU INDUSTRIAL PARK, CHANGLE COUNTY, WEIFANG CITY, SHANDONG, P. R. CHINA.
Version: 2.0/EN Revision date: 01/03/2022
Product name: P-600 Printing date: 01/01/2022
Section 1 Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier:
Identification on the label/Trade name: Acrylic processing aid
Additional identification: PVC processing aid
EC# -Index Number: Not available
REACH registration No.: Not available
1.2 Relevant identified uses of the substance and uses advised against:
1.2.1 Identified uses:
PVC Profile, PVC Pipe, PVC foaming Products etc.
1.2.2 Uses advised against:
Not available.
1.3 Details of the supplier of the safety data sheet:
Supplier(Only representative): -
Supplier(Manufacturer): Shandong Polymers Additives Co., Ltd.
Address: Changle County, Weifang City, Shandong Province, China,
Contact person(E-mail): info@pvcadd.com
Telephone: +86-536-8628518
Fax: +86-536-8628716
1.4 Emergency telephone Number:
+86-536-8628518 Only available during office hours (9:00a.m.-17:00p.m. Beijing Time Zone)
Available outside office hours? YES X NO
Section 2 Hazards Identification
2.1 Classification of the substance/mixture:
2.1.1 Classification:
The substance is classified as following according to 67/548/EEC and REGULATION (EC) No 1272/2008:
REGULATION (EC) No 1272/2008 | |
Hazard classes/Hazard categories | Hazard statement |
N/A | N/A |
For full text of H- phrases: see section 2.2.
67/548/EEC | |
Hazards characteristics | R-Phrases |
N/A | N/A |
For full text of R- phrases: see section 16.
2.2 label elements:
Hazard Pictogram: No hazard pictogram is used. Signal Word(S): No signal word is used. Hazard Statement: Not applicable. Precautionary statement: Not applicable.
2.3 Other hazards:
Not available.
Section 3 Composition/information on ingredients
Substance/Mixture: Substance
Ingredient(s):
Chemical Name |
Registration No. |
CAS No. |
EC No. |
Concentration |
Acrylic polymer | N/A | 25852-37-3 | N/A | 99.0-100.0% |
Individual residual monomers | N/A | Not Required | N/A | <1.0% |
Section 4 First aid measures
4.1 Description of first aid measures:
In all cases of doubt, or when symptoms persist, seek medical attention.
4.1.1 In case of inhalation:
Remove the person affected to the place with fresh air. Consult a physician if need. If conscious, give water to drink.
4.1.2 In case of skin contact:
Wash the affected skin area with soap and water, consult a dermatologist if necessary.
4.1.3 In case of eyes contact:
Flush eyes with a large amount of clean water for at least 15 minutes. Consult oculist if needed.
4.1.4 In case of ingestion:
Materials cause no harmful effects under normal circumstances, but if vomiting occurs, get medical attention immediately. Never give anything by mouth to an unconscious person. Consult a physician if necessary.
4.2 Most important symptoms and effects, both acute and delayed:
The product is not classified as harmful to human health effect.
4.3 Indication of any immediate medical attention and special treatment needed:
If skin irritation or rash occurs, get medical advice/attention.